Calculation and display of skin dose maps¶
- Skin dose maps have been withdrawn from OpenREM version 0.7.0 due to incorrect orientation calculations that need to be fixed before openSkin can be reimplemented into OpenREM. It is hoped that they will be included in version 0.7.1.
- Users can continue to export OpenREM studies in a format that can be used with a stand-alone version of openSkin.
Functionality that will be available¶
- Skin dose map data calculated to the surface of a simple geometric phantom using the in-built openSkin routines (3D phantom)
- Phantom dimensions calculated from the height and mass of the patient
- Data can be calculated on import to OpenREM, or on demand when a study is viewed
- 3D skin dose map data shown graphically as a 2D image and a 3D model
- The user can change the maximum and minimum displayed dose; alternatively, window level and width can be adjusted
- A colour dose scale is shown with a selection of colour schemes
- The skin dose map section can be displayed full-screen
- The calculated peak skin dose, phantom dimensions and patient height and mass used for the calculations are shown in the top left hand corner of the skin dose map
- If skin dose map display is disabled then fluoroscopy study data can be exported in a format suitable for the stand-alone openSkin routines
The phantom consists of a cuboid with one semi-cylinder on each side (see 3D phantom section of phantom design on the openSkin website for details). A default height of 1.786 m and mass of 73.2 kg are used if patient-specific data are unavailable.
2D visualisation of the 3D data¶
This is a 2D view of the whole surface of the 3D phantom, as though the phantom surface has been peeled off and laid out flat. The 2D visualisation includes the following features:
- The skin dose at the mouse pointer is shown as a tool-tip
- Moving the mouse whilst holding down the left-hand mouse button changes the window level and width of the displayed skin dose map
- An overlay indicating the phantom regions and orientation can be toggled on and off. This indicates the phantom anterior, left, posterior and right sides, and also shows the superior and inferior ends
- The current view can be saved as a png file
This is a 3D view of the phantom that was used for the calculations, with the skin dose map overlaid onto the surface. The 3D visualisation includes the following features:
- Moving the mouse whilst holding down the left-hand mouse button rotates the 3D model
- Using the mouse wheel zooms in and out
- A simple 3D model of a person is displayed in the bottom left corner. This is to enable the viewer to orientate themselves when viewing the 3D skin dose map
- The current view can be saved as a png file
Skin dose map settings¶
There are two skin dose map options that can be set by an OpenREM
administrator via the
Skin dose map settings option in the
- Enable skin dose maps
- Calculate skin dose maps on import
The first of these sets whether skin dose map data is calculated, and also switches the display of skin dose maps on or off. The second option controls whether the skin dose map data is calculated at the point when a new study is imported into OpenREM.
When skin dose maps are enabled:
- When a user views the details of a fluoroscopy study OpenREM looks for a skin
dose map pickle file on the OpenREM server in the
MEDIA_ROOTthat corresponds to the study being viewed. If found, the skin dose map data in the pickle file is loaded and displayed. The
skin_mapsfolder is created if it does not exist
- If a pickle file is not found then OpenREM calculates skin dose map data.
These calculations can take some time. They are carried out in the
background: an animated graphic is shown during the calculations. On
successful calculation of the data the skin dose map is displayed. A pickle
file containing the data is saved in the server’s
MEDIA_ROOT. The file name is of the form
XXXXis the database primary key of the study
- For subsequent views of the same study the data in the pickle file is loaded, rather than re-calculating the data, making the display of the skin dose map much quicker
When calculation on import is enabled:
- OpenREM calculates the skin dose map data for a fluoroscopy study as soon as it arrives in the system
- A pickle file containing the data is saved in the
- Users viewing the details of a study won’t have to wait for the skin dose map data to be calculated
Exporting data to openSkin¶
If skin dose maps are disabled the user you are presented with the option of exporting the study data as a csv file for use with a stand-alone installation of openSkin. Select the fluoroscopy study you wish to create the exposure incidence map for and go to the detail view. Then click on the link to create the OpenSkin export (figure 5).
Instructions for openSkin¶
Download the latest version as a zip file from openSkin downloads. At the time of release for OpenREM 0.7.0 the current openSkin beta was dated 14th September 2016. The application referred to here will only work on Windows.
- Extract the contents of the zip file into a folder on your computer and run the openSkin.exe executable
- Choose a phantom type: 3D or flat. See phantom design for details
- Select the source csv file - this should be the one exported from OpenREM
- Select the output folder - this should already exist as it can’t be created in the dialogue
- Wait! Depending on the number of events in the export and the power of your machine, this can take a few minutes
Two files will be produced - a textfile called
skin_dose_results.txt and a
small image called
Results text file¶
It should look something like this:
File created : 04/21/15 17:42:45 Data file : C:/Users/[...]/exports-2015-04-21-OpenSkinExport20150421-162805246134.csv Phantom : 90.0x70.0 3d phantom Peak dose (Gy) : 0.50844405521 Cells > 3 Gy : 0 Cells > 5 Gy : 0 Cells > 10 Gy : 0
The peak dose is the peak incident dose delivered to any one-cm-square area. If any of these 1 cm2 areas (referred to as cells) are above 3 Gy, then the number of cells in this category, or the two higher dose categories, are listed in the table accordingly.
Incidence map image file¶
The image file will be a small 70x90 px PNG image if you used the 3D phantom, or 150 x 50 px PNG if you used the 2D phantom. With both, the head end of the table is on the left.
The image is scaled so that black is 0 Gy and white is 10 Gy. For most studies, this results in an incidence map that is largely black. However, if you use GIMP or ImageJ or similar to increase the contrast, you will find that the required map is there.
A native and ‘colour equalised’ version of the same export are shown below:
Skin dose map calculations do not currently work for all systems. Siemens Artis Zee data is known to work. If skin dose maps do not work for your systems then please let us know via the OpenREM Google Group.